JungleFlasher 0.1.65(27) ======================================== General items Updated --------------------------------------- KeyDB and Log to Notepad fixed for windows 7 and foreign languages Lite-On-Erase --------------------------------------- - Extra check added, Drive Serial is compared to Target f/w - a mismatch will cause a warning... Just in case user were - to hook up a new lite-on and forget to do DVDkey32 MtkFlash32 --------------------------------------- - Disable related windows drive letters on Intro - Windows interfers with read-back verify as it thinks drive is - still present after into. This occured primarily with benq - running ix > 1.41. The half tray unlock also give windows - drive letter. On intro, drive list is refreshed, scanned for - the drive on the current port and disabled if found.. Lite-On 83850c support --------------------------------------- - ix 1.6 83850 support added ( cross spoofing of ix revs NOT supported ) - conversion of [barcode].bin.key to dummy.bin - Autoload dummy, auto-load ix, spoof ix - extract of [barcode].bin JungleFlasher 0.1.64(16) ======================================== General items Updated --------------------------------------- Ctrl + F4 to open iXtreme from firmware folder to Target Added context menus to Source and target tabs Source - open f/w from working folder - clear source - update to key data base Target - open f/w from working folder - open f/w from .\firmware folder - clear target Removed - not allowing blank serial in for Lite-on Dummy.bin previously if serial was blank the iX file serial was left as is Warning changed for dummy.bin w/o serial, to mention is possibly ok. Key Database in Registry --------------------------------------- Database will be populated automatically from a dump. Ctrl + F10 to add/update key database from Source tab info Ctrl + F12 to launch notepad with key database Ctrl + F11 to create .csv from key database Added extra item to explorer context to load as source and add key to db iX will not autoload to target for this task can select mutliple f/w files, these will load in turn Hitachi Support Updated --------------------------------------- Fixed bug in Rev 36 Ram Upload Dump Code All dumps are rev checked immediately, a failure to identify will abort sequence dumps from other drives and locked 79's (coming back empty) would proceed to key check and fail MTKFlash32 --------------------------------------- Added warning message Yes/No to Flash Erase Button (default is No!) Added Esc to abort to flash read within auto reads in moddermode Bypassed Sammy-Un-Lock warning in ModderMode JungleFlasher 0.1.62 ======================================== Release for iX 1.6 0800 for Samsung, Benq and Lite-On... Hitachi Support Updated --------------------------------------- Windows drive enum changed successful Classic dump will detect and set correct drive type for pre 78 drives. Inquiry of spoofed drives would select incorrect version. DVDKey32 Support Updated --------------------------------------- better support for Maximus USB Xtractor - using FTDI api FTD2XX.dll General items Updated --------------------------------------- Improved launch times JungleFlasher 0.1.60 ======================================== Release for iX 1.6 for Samsung, Benq and Lite-On... Jf will now target 1.6 files by default Hitachi Support Updated --------------------------------------- Right Click windows drive list for context to open/close drive tray DVDKey32 Support Updated --------------------------------------- Added Support for USB Extractor Switch in Vista, for remote launch of DVDkey32 from probe JungleFlasher 0.1.59 - cleanup to 0.1.55 ======================================== DVDKey32 Support Updated --------------------------------------- Added Support for USB Extractor Switch, for remote launch of DVDkey32 from probe Added optional delay on dvdkey32... allow time for probe.... delay32 in reg, default is 0, max 20 sec Hitachi Support Updated --------------------------------------- Added Stop-Disk to Hitachi commands, People were still putting in a disk, a habit from FWTB days, commands would fail and the drive would crash. Improvements to Ram upload dump, should dump in 1 - 1.5 sec... added timer for the fun of it... Introducing USmodeB with JungleUSB drivers, for Hitachi 1. JungleUSB drivers allow Hitachi on USB to be seen in Mode-A, mode-B command can be issued 2. at power up, you may need to open/close the drive to allow windows to PnP fully 3. Send USmodeB - JF will enumerate all windows drive letters and find any Hitachi, JF will send mode-b General items Updated --------------------------------------- Added, test for port IO.... JF will scan device tree for PortIO, 4 outcomes are possible i. port io running aok ii. port removed iii. port not installed iv. port io has an error Fixed, Ctrl f7 for Drive pororties on PortIO, drives were not being detected Added donate icon, users complained they conuldn't see.... ;-) JungleFlasher 0.1.55 - cleanup to 1.51 ======================================= We have probably added or changed alot more but this is what we could remember. Hitachi Support Updated --------------------------------------- - Portio will only be enabled with "Via Only" ticked, as it was only added to support Via w/o drivers - Via card must also report status (Code 39)... no drivers loaded - Mode Select method removed from Port IO. Mode Select is for USB support, port IO does not support USB. Modder Mode --------------------------------------- - Now stops on bad device ID. Splash Screen --------------------------------------- - Context enable/disable removed from splash ( added as a ctrl key) Advanced Ctrl F Keys --------------------------------------- - Ctrl + F5 key, set modder mode backup directory, clear folder to disable it - Ctrl + F6 key, hitachi read block size 100 --> 2000 ( 78 and 79 FK models will fail on this ) - Ctrl + F7 key, set working folder in modder mode... clear all tabs and save log - Ctrl + F8 key, enable "Free Flash" and "Ram Poke" in Hiatachi - Ctrl + F1 key, enable context menus - Ctrl + F2 key, disable context menus Lite-On Dummy.bin Serial Fixer --------------------------------------- - Bug, fixer added drive barcode byte swapped to Identify string, fixed. Sammy flash --------------------------------------- - was failing for at least one user.. typo in last cleanup. fixed. Port Inquiry --------------------------------------- - Timeout in port Inquiry for drive properties extended from 200ms to 1s Lite-On-Erase --------------------------------------- - Dead time after l-o-erase extended from 2s to 3s - dots and timer added for better appearance.