This tool makes a bootable USB key including all the files needed to backup, flash and recover your Samsung Xbox360 Firmware, all in one simple automatic process! Installation: 1. - Extract the archive to your hard drive 2.- Insert your USB Stick 3. - Format your USB Stick with the HP Usb Disk Storage Format Tool included (HPUSBFW.EXE), select FAT32 and "Create a DOS Startup Disk" using the files included in the folder. Check the Pictures folder for visual assistance! 4. - Copy the contents of the archive to the root directory of your USB Stick (if space is a issue, or you are using a floppy, simply copy the autoexec.bat and firmware + command folders over. If you know which card you have, you may copy only the neccessary folder within the firmware folder, e.g. Via or Nforce4.) 5. -Run Bios Agent to find your chipset (see pictures folder) 6. - Adjust Your BIOS Settings to boot from the USB Stick 7. - Boot to your USB Stick 8. - run autoexec.bat to start. Sidenote - Those of you who wish to utilize these tools on a floppy may skip all the instructions, and just copy the neccessary autoexec.bat, command folder, and needed firmware folder over. Thanks to Flash78 for the tool! Translated by geebee. C4E patcher based upon xtreme_legal_patcher sources, thanks to JbOnE for compiling DOS version :) Thanks to geebee for the organization and .bat work :) -Iriez PS- Incase anyone is wondering why we re-invented the wheel, the kdx dos based key patcher has proven to be very unreliable. The patcher included is based on the xtreme_legal_patcher patches the firmware to c4e's hack, without messing with any of the key's. No more botched firmwares and headache's for those of you trying to figure out 'what went wrong' :)